Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!
Colourland PU Timber Seal
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish SMOOTH MATT FINISH
-
Coverage 14 m²/L
-
Drying Time Single coat at standard thickness: Dependant on temperature and humidity
-
Coats 2
-
Accentuates Natural Wood Grains
-
Water Resistant
-
Durable Smooth Finish
-
Crack, Blister and Peel Resistant
Product Description
Colourland PU Timber Seal is special Polyurethane ( PU ) based air drying formulation, formulated to enhance the natural beauty of wood and protect it against wood rot and mould growth by its penetrative properties, which ensure the introduction of preservatives into the wood cell. It is suitable for use on all types of new or previously treated interior hard and soft woods, will not peel, crack or blister. Its extremely durable, hard and flexible finish with excellent abrasion resistance is highly recommended for use on cane or wooden furniture and fixtures, doors paneling, partition and parquet flooring.
Application Description
Roller or Brush
Health & Safety
Flammable liquid and vapour|May cause drowsiness or dizziness|Toxic to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking|Keep container tightly closed|Use only outdoors or in a well-ventilated area|Do not get in eyes, on skin, or on clothing|Do not breathe vapour|Call a POISON CENTER or doctor if you feel unwell
Tips & Advice
-
1. Preparing the Surfaces"New : Surface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish, rub down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill wood grain with any wood filler and smoothen with abrasive. Allow paint to dry and lightly dry sand between the 1st and 2nd coat.
Repainting : Remove all loose, defective, unstable and existing paint film to barred wood. Rub down surface in direction of the grain. If necessary, fill wood grain with filler and smoothen with abrasive. Seal the timber with Colourland PU Timber Seal thinned down with 10 – 20% with appropriate thinner or white spirit. And paint 2 to 3 coat of Colourland PU Timber Seal, for best effect lightly dry sand between coats." -
2. CleaningClean all equipment with white spirit immediately after use.
-
3. StoringStore locked up|Store in a well-ventilated place|Keep cool
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.