Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!
Colourland Acrylic Tile Finish
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Low Sheen
-
Coverage 10–15 m²/L
-
Drying Time Single coat at standard thickness: Dependant on temperature and humidity
-
Coats 2
-
Resist to Algae & Fungus Growth
-
Extremely Dirt Pick-up Resistance
-
Chemical Resistance
-
Fast drying
Product Description
Colourland Acrylic Tile Finish is a 100% Acrylic air drying solvent based formulation. No additional of hardener is required. It dries rapidly to an extremely durable, tough and hard finish with excellent abrasion
resistance and waterproof properties. Enhances the natural beauty of stone finishes and protect it from premature aging. Highly recommend for car porch and light traffic areas. Suitable for exterior and interior usage on metal, concrete or wood.
resistance and waterproof properties. Enhances the natural beauty of stone finishes and protect it from premature aging. Highly recommend for car porch and light traffic areas. Suitable for exterior and interior usage on metal, concrete or wood.
Application Description
Roller or Brush or Road Marking Machine
Health & Safety
Flammable liquid and vapour|Causes skin irritation|Harmful to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking|Keep container tightly closed|Do not get in eyes, on skin, or on clothing|Wash hands thoroughly after handling|Call a POISON CENTER or doctor if you feel unwell
Tips & Advice
-
1. Preparing the SurfacesSurface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish for Pebble Wash, acid wash the surface to remove excess Ordinary Portland Cement residue and flush with fresh water, leave to dry and paint.
-
2. CleaningClean all equipment with white spirit immediately after use.
-
3. StoringStore in a well-ventilated place| Keep cool
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.