Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!

Colourland Aqua Floor
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish Sheen Finish
-
Coverage 10–12 m²/L
-
Drying Time Single coat at standard thickness: Dependant on temperature and humidity
-
Coats 2
-
High Sheen Finish
-
Flexible & Durable
-
Washable
-
Anti-Mould & Algae
Product Description
Colourland Aqua Floor Paint is a tough and flexible coating with fungus and algae resistant for the protection and decoration of all concrete surfaces, fair faced bricks, slate tiles, paver, cement cladding and roofing. Aqua Floor Paint is based on Vinyl Acetate – Acrylic Copolymer, which produce a tough, durable and flexible paint film able to withstand the effects of harsh environment with constant climatic and temperature variations.
Application Description
Roller or Brush
Health & Safety
May cause an allergic skin reaction|Harmful to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Do not get in eyes, on skin, or on clothing|Call a POISON CENTER or doctor if you feel unwell
Tips & Advice
-
1. Preparing the SurfacesNew : Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish rubbed down surface using suitable abrasive and dust off. If after thorough preparation surface remain powdery, or suffer from alkali attack. For best effect seal with one coat of appropriate primer.
Repainting : Remove all loose, defective and unstable paint film or powdery residues by thorough brushing and scraping. High Pressure Water Jet is highly recommended. Treat areas effected by mould, lichens, algae and moss with any fungicidal wash. Make good minor defects and crack with suitable Exterior Grade Filler. -
2. CleaningClean all equipment with water immediately after use.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.