Colourland Easy Care

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt Finish
  • Coverage 10-12 m2/L.
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity
  • Coats 2
Product Features
  • Anti-Mould
  • Good Opacity
  • Washable & Scrubbable
  • Low Odour Low VOC
  • Fungus Resistant
  • Classic Matt Finish

Product Description

Colourland Easy Care Anti-Mould is a modified acrylic emulsion paint specially formulated for smooth classic matt finishes. It is a durable interior paint which can withstand washing and scrubbing. It is formulated with anti-mould and anti-fungus properties to create a healthier living environment. It is suitable for all interior walls and ceiling surfaces, ideal for areas like bathroom, living room, kitchen, bedroom, office partition and decorative fiberglass fabric wall covering.

Application Description

Roller or brush

Health & Safety

Harmful to aquatic life with long lasting effects.Keep out of reach of children.If medical advice is needed, have product container or label at hand.Do not get in eyes, on skin, or on clothing.Call a POISON CENTER or doctor if you feel unwell. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Colourland Product Safety Data Sheet for further details.

Tips & Advice

  • 1. Preparing the Surfaces
    Remove any loose paint or powdery residue by brushing/scraping with a stiff fiber brush under running water or a high pressure water jet. Use Fungicidal Wash to treat areas affected by mould, lichen, algae or moss. Make sure that your wall is dry before painting. Do not paint if the wall is saturated with dampness (Protimeter reading higher than 16%). Allow excess moisture to evaporate. Make sure that the surface to be painted is clean, dry and free from any defects, dirt, grease or wax.
  • 2. Cleaning
    Clean all equipment with water immediately after use.
  • 3. Storing
    Keep away from food, drinks and animal feed. Store in a cool and shaded place.