Colourland Elastoseal

Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish NA
  • Coverage 10-12 m² /L
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity
  • Coats 1
Product Features
  • Low Odour Low VOC
  • Excellent Resistance To Saponification
  • Flexible
  • High Water Resistant

Product Description

Colourland ElastoSeal is a multi-purpose water-based high-build modified acrylic sealer suitable for use with ElastoKote membrane systems. Colourland ElastoSeal is designed as an elastic, high water permeability,
excellent alkaline & efflorescence resistance, fast drying and non-toxic waterproof sealer. The single component nature of Colourland ElastoSeal makes it easy to use and suitable for priming in new construction, repair & renovation projects and preventive maintenance works. The final cured film is tough and able to promote better adhesion to the cleaned, competent substrates or surfaces such as concrete, fibrous cement sheet, render, brick and bituminous membrane. It also suitable to apply on exposed areas like roofing, podium decks, external wall and balcony dooring sills.

Application Description

Roller or Brush or Squeegee.

Health & Safety

May cause an allergic skin reaction|Harmful to aquatic life with long lasting effects|Wear protective gloves|Avoid release to the environment|Avoid breathing vapour|Wash contaminated clothing before reuse|IF ON SKIN: Wash with plenty of water|If skin irritation or rash occurs: Get medical advice or attention

Tips & Advice

  • 1. Preparing the Surfaces
    Clear all loose materials and debris from the surfaces to be primed and coated.Water-jet the surfaces to thoroughly remove all laitence, dust, oil, unstable substrate materials and other contamination from the surface before primer application. Remove all excess cleaning water from water- jet cleaned surfaces, allow surface to dry. Concrete surfaces - Surfaces must be clean and dry, all depressions and potential ponding areas are filled out, and a proper screed-to-fall established. Check concrete moisture levels first before coating work begins to ensure that insitu moisture is low enough.
  • 2. Cleaning
    Clean all equipment with water immediately after use.
Fetching the data, please wait...