Colourland High Gloss

BUTTERFIELD 20YY 51/306
Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Gloss
  • Coverage 17-18 m²/L
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity
  • Coats 2
Product Features
  • Low Odour
  • Smooth Mirror-like Finish
  • Good Gloss Retention
  • Quick Dry
  • Mould and Mildew Resistant

Product Description

Colourland High Gloss is a premium quality low aromatic high gloss paint, suitable for use on all types of wood and metal surfaces. Based on alkyd, it is a fungus resistant high gloss architectural paint that is easy to apply and forms a smooth mirror like and tough paint film with excellent gloss, long lasting and high durability.

Application Description

Roller or Brush

Health & Safety

Flammable liquid and vapour|May cause drowsiness or dizziness|Toxic to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking|Keep container tightly closed|Use only outdoors or in a well-ventilated area|Do not get in eyes, on skin, or on clothing|Avoid breathing vapour|Call a POISON CENTER or doctor if you feel unwell

Tips & Advice

  • 1. Preparing the Surfaces
    "Repainting : Remove all loose, defective and unstable paint film. Rusted and defective areas should be sanded and feather edged and spot primed with Colourland Zinc Phosphate Primer before applying subsequent coatings
    Wood : Wood must be dry and free from grease, dirt and other contaminants, smoothen surface with suitable grade sand paper and dust off before application of undercoat and paints.
    Metal : Surface must be dry and free from grease, dirt and other contaminants. Steel surfaces should be sanded or wire-brushed to remove mill scales and rust. For best result steel surfaces should be prepared by hand or power tool. Galvanised and Aluminium surfaces should be cleaned and degreased, apply an appropriate Etch Primer to ensure good adhesion. "
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use.
  • 3. Storing
    Store locked up|Store in a well-ventilated place|Keep cool
Fetching the data, please wait...