Colourland PU Timber Seal

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Coverage 14 m²/L
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity
  • Coats 2
Product Features
  • Accentuates Natural Wood Grains
  • Water Resistant
  • Durable Smooth Finish
  • Crack, Blister and Peel Resistant

Product Description

Colourland PU Timber Seal is special Polyurethane ( PU ) based air drying formulation, formulated to enhance the natural beauty of wood and protect it against wood rot and mould growth by its penetrative properties, which ensure the introduction of preservatives into the wood cell. It is suitable for use on all types of new or previously treated interior hard and soft woods, will not peel, crack or blister. Its extremely durable, hard and flexible finish with excellent abrasion resistance is highly recommended for use on cane or wooden furniture and fixtures, doors paneling, partition and parquet flooring.

Application Description

Roller or Brush

Health & Safety

Flammable liquid and vapour|May cause drowsiness or dizziness|Toxic to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. - No smoking|Keep container tightly closed|Use only outdoors or in a well-ventilated area|Do not get in eyes, on skin, or on clothing|Do not breathe vapour|Call a POISON CENTER or doctor if you feel unwell

Tips & Advice

  • 1. Preparing the Surfaces
    "New : Surface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish, rub down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill wood grain with any wood filler and smoothen with abrasive. Allow paint to dry and lightly dry sand between the 1st and 2nd coat.
    Repainting : Remove all loose, defective, unstable and existing paint film to barred wood. Rub down surface in direction of the grain. If necessary, fill wood grain with filler and smoothen with abrasive. Seal the timber with Colourland PU Timber Seal thinned down with 10 – 20% with appropriate thinner or white spirit. And paint 2 to 3 coat of Colourland PU Timber Seal, for best effect lightly dry sand between coats."
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use.
  • 3. Storing
    Store locked up|Store in a well-ventilated place|Keep cool
Fetching the data, please wait...