Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!

Colourland Red Oxide Primer
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish SMOOTH MATT FINISH
-
Coverage 11-15 m²/L
-
Drying Time Single coat at standard thickness: Dependant on temperature and humidity
-
Coats 1
-
Anti Corrosive Solvent Based Metal Primer
-
Economical
Product Description
Colourland Red Oxide Primer is based on Anti Corrosive Iron Oxide pigment in an alkyd medium. It is an economical, anti corrosive solvent based metal primer for interior and exterior use. It can also be applied on weathered and pre-treated Aluminium, Zinc and Galvanised Iron
Application Description
Roller or Brush
Health & Safety
Flammable liquid and vapour|May cause drowsiness or dizziness|Toxic to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking|Keep container tightly closed|Use only outdoors or in a well-ventilated area|Do not get in eyes, on skin, or on clothing|Avoid breathing vapour|Call a POISON CENTER or doctor if you feel unwell
Tips & Advice
-
1. Preparing the Surfaces"Metal surface must be dry and free from grease, dirt and other contaminants. Steel surfaces should be sanded or wire-brushed to remove mill scales and rust. For best result steel surfaces should be prepared by hand or power tool. Galvanised and Aluminium surfaces should be cleaned and degreased, apply an appropriate Etch Primer to ensure good adhesion.
Repainting : Remove all loose, defective and unstable paint film. Rusted and defective areas should be sanded and feather edged and spot primed with Colourland Grey Green Zinc Phosphate Primer before applying subsequent coatings. -
2. CleaningClean all equipment with white spirit immediately after use.
-
3. StoringStore locked up|Store in a well-ventilated place|Keep cool
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.