• Colourland Solar Seal

Colourland Solar Seal

Size
Paint Calculator
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Gloss
  • Coverage 14 m²/L
  • Drying Time Single coat at standard thickness: Dependant on temperature and humidity
  • Coats 2
Product Features
  • Enhance Natural Beauty of Wood
  • Fungus and Algae Resistant
  • Exterior Durability
  • Good Colour Retention
  • Good Adhesion and Flexibilty

Product Description

Colourland Solar Seal is a special modified alkyd based air drying formulation, exclusively formulated to protect outdoor exposed wooden surfaces against wood rot and mould growth by its penetrative properties, which ensure the introduction of preservatives into the wood cell. It is suitable for use on all types of new or previously treated exterior and interior hard and soft woods, will not peel, crack or blister on exposure to weather. Its extremely durable, hard and flexible finish with excellent abrasion resistance is highly recommended for use on cane or wooden furniture and fixtures, door panelings, partition and parquet flooring. Its water resistant and transparent finishes will enhance the natural beauty of wood.

Application Description

Roller or Brush

Health & Safety

Flammable liquid and vapour|May cause drowsiness or dizziness|Toxic to aquatic life with long lasting effects|Keep out of reach of children|If medical advice is needed, have product container or label at hand|Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking|Keep container tightly closed|Use only outdoors or in a well-ventilated area|Do not get in eyes, on skin, or on clothing|Avoid breathing vapour|Call a POISON CENTER or doctor if you feel unwell
Download Adobe Reader
  • 19.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    New : Surface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease or wax. To have better finish, rub down surface in the direction of the grain using suitable abrasive and dust off. If necessary, fill wood grain with any wood filler and smoothen with abrasive. Allow paint to dry and lightly dry sand between the 1st and 2nd coat.
    Repainting : Remove all loose, defective, unstable and existing paint film to barred wood. Rub down surface in direction of the grain. If necessary, fill wood grain with Colourland Wood Filler and smoothen with abrasive. Seal the timber with Colourland Solar Seal thinned down with 10 – 20% with appropriate thinner or white spirit. And paint 2 to 3 coat of Colourland Solar Seal, for best effect lightly dry sand between coats.
  • 2. Cleaning
    Clean all equipment with white spirit immediately after use.
  • 3. Storing
    Store locked up|Store in a well-ventilated place|Keep cool

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.