Good to see you!
Otherwise login by email
Welcome to Dulux
Otherwise login by email
Terms & Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks!

Mesa Trade Wall Sealer
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Coverage 12-14 m2/L.
-
Drying Time Single coat at standard thickness: Dependant on temperature and humidity
-
Coats 1
-
Excellent alkaline & efflorescence resistance
-
Treat Powdery Surface
Product Description
Mesa Trade Wall Sealer is a premium quality, water based sealer with good alkali resistant and adhesion properties. It is also highly recommended for previously painted surfaces as a primer for repainting of subsequent coating.
Application Description
Roller or brush
Health & Safety
Keep out of reach of children.If medical advice is needed, have product container or label at hand.Do not get in eyes, on skin, or on clothing.Call a POISON CENTER or doctor if you feel unwell. Do not breathe vapour/ spray. Use only in well ventilated areas Safety data sheet available for professional user on request. Avoid contact with skin or eyes If swallowed seek medical advice immediately and show this container or label. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Refer to special instructions/Safety data sheet. Do not empty into water course. Dispose of used container in compliance with local regulation. Refer to Colourland Product Safety Data Sheet for further details.
Tips & Advice
-
1. Preparing the SurfacesRemove any loose paint or powdery residue by brushing/scraping with a stiff fiber brush under running water or a high pressure water jet. Use Fungicidal Wash to treat areas affected by mould, lichen, algae or moss. Make sure that your wall is dry before painting. Do not paint if the wall is saturated with dampness (Protimeter reading higher than 16%). Allow excess moisture to evaporate. Make sure that the surface to be painted is clean, dry and free from any defects, dirt, grease or wax.
-
2. CleaningClean all equipment with water immediately after use.
-
3. StoringKeep away from food, drinks and animal feed. Store in a cool and shaded place.
How much paint do I need?
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.